| General Description |
Polyarmor® G32 is a functionalized polyethylene copolymer-based thermoplastic powder coating that exhibits excellent impact resistance and UV-stability. Polyarmor® G32 is designed to have a slightly higher Melt Index which assists in areas where out gassing is an issue. Applications consist of metal components such as chain link fence fabric, pipe and fittings that has been hot dipped galvanized. |
| Application Data |
| Surface preparation |
Chemical Pretreatment |
Multi-stage phosphate conversion coating may be used. Please visit with your local chemical pretreatment supplier for advice on the products that fit your application.
|
Mechanical Preparation (Grit Blasting) |
(SSPC-SP6) 2-3 mil anchor profile using clean, sharp edged blast media.
|
NOTE: Properly preparing parts before powder coating is essential for a quality finish. This includes cleaning, rinsing, drying and insuring that the substrate surface is free and clear of any contaminates. |
| Fluidized Bed |
For fluidized bed dipping, preheat parts to 400°F (adjust according to part thickness). Dip parts in fluidized bed of Polyarmor® G32 for 4 - 6 seconds. Carefully blow off the excess powder. For improved surface finish (if necessary), parts may be post-baked for a short period of time. |
| Electrostatic Deposition |
For electrostatic deposition, preheat parts to 400°F. Deposit Polyarmor® G32 8-12 mils thick. For improved surface finish (if necessary), parts may be post-baked for a short period of time. |
| For complete application details email: techsupport@innotekllc.com |
| NO CURE TIME! |
Thermoplastic powder coatings need only be heated enough to flow out the coating, nothing more. Overheating may cause degradation or embrittlement of the coating. Coating may be put into service when cooled. |
 |
